This week I remade a baby quilt top tutorial from my old blog with some delicious Bonnie and Camille rainbow goodness. It was a fast, easy, satisfying project!
Mostly I just needed an excuse to use this stack of fabric together, but also I'd been meaning to test out the tutorial and see if it could be made in less than an hour since I have a faster machine now. Like always, there were many (welcome!) interruptions, so it's impossible to tell how long it really took. Suffice to say, not very long!
I thought I'd repost the original tutorial here for your use, it's a great little trick to have up your sleeve in a pinch. Here it is:
"Scrappy Trip Around the World" is a quilt pattern tutorial by Bonnie at Quiltville.
It uses an interesting piecing method involving unpicking seams- on purpose! It's a great way to use strip scraps, and delightful to see how the
different patterns emerge as you go. I have made two of them and loved them both.
The first one was a red, white, and blue classic Scrappy Trip that we still use at our house often. I posted about that one here, or you can check it out on Instagram @woodberry_way under #marquittascrappytrip.
The second one alternated prints with white, and I made the blocks bigger so as to use every last scrap of a Jelly Roll. You can find a tutorial and all the information for that variation here.
Here's how I used this tube method to make a 36" x 48" simple baby quilt.
Supplies:
12 different 1/4 yard cuts in coordinating prints (I used Cottage Garden by The Quilted Fish, plus some blenders)
1/2 yd for binding
1 1/2 yds for backing
You will also need your trusty seam ripper :)
1. Cut strips to 4.5" by WOF. (You can technically make two of these quilts out of 1/4 yd cuts, if your cuts are very careful and straight.) You should have 12 strips, one of each print. (These cut strips are folded into quarters.)
2. Arrange the the strips however you'd like. You can blend the colors to achieve an ombre look, or go for high contrast with distinct stripes. The stripes you see here will be the same as the diagonal stripes in the end. Also, keep in mind that the top and bottom rows will touch eventually, so make sure you like the way they look together.
You can see here I arranged the colors with two different results in mind- one with blended colors and one with contrasting.
3. Sew strips together. Use a 1/4" seam. You know the drill.
You'll have what could be a simple striped quilt top. Don't trim it yet! The fabric widths vary depending on manufacturer, and that's alright.
4. Press seams, alternating the direction on every row. This will ensure that your seams nest in the end, making it much easier to match up corners.
5. Fold in half, right sides together, and sew the top and bottom strip together. You will create a tube of strips. You can see I don't fuss about threads until the end.
6. Lay the "tube" flat, and cut perpendicularly into 4.5" strips. I fold it in half again for easier cutting, just make sure it's lined up! You should have 9 tube strips.
7. Take a tube strip and unpick one of the seams. Keep in mind that wherever you start unpicking will determine which print will start the pattern in the upper left corner. Lay that strip flat.
8. Determine which seam needs to be unpicked in the second row by looking at the first two prints of your first flat strip. Unpick the seam between those two first prints. When you lay this one next to the first you will see that the prints have all shifted over one spot. Continue to do this, laying them out with the first color from the last row in the last spot on the next, and you will see the diagonal stripes emerge. Remember, these are the vertical columns of the quilt. (You can see I have highly qualified help!)
EDIT: For my newest rainbow version, I wanted the diagonal lines to go up instead of down, so I unpicked the first seam on the other end first.
*Note: You can't rotate the layout (like in the original Scrappy Trip block) unless you reduce the pattern to a 9 by 9 grid. It will only work with a square layout. I highly recommend trying that too, it's super fun!
9. Sew your strips together, "nesting" the seams as you go. As you put your strips right sides together to join them, you'll see that the seams you ironed will alternate, making them easy to tuck into each other as you go. This eliminates the need to pin, and you can feel that the seams are lined up perfectly, making perfect corner points. Press your rows all one direction and trim any threads.
Voila! You have a lovely 36" by 48" quilt top ready to go- the perfect baby size. Layer, baste, and bind with your favorite method. There are lots of wonderful tutorials out there for these steps if you are still learning.
Mostly I just needed an excuse to use this stack of fabric together, but also I'd been meaning to test out the tutorial and see if it could be made in less than an hour since I have a faster machine now. Like always, there were many (welcome!) interruptions, so it's impossible to tell how long it really took. Suffice to say, not very long!
I thought I'd repost the original tutorial here for your use, it's a great little trick to have up your sleeve in a pinch. Here it is:
The first one was a red, white, and blue classic Scrappy Trip that we still use at our house often. I posted about that one here, or you can check it out on Instagram @woodberry_way under #marquittascrappytrip.
The second one alternated prints with white, and I made the blocks bigger so as to use every last scrap of a Jelly Roll. You can find a tutorial and all the information for that variation here.
Here's how I used this tube method to make a 36" x 48" simple baby quilt.
Supplies:
12 different 1/4 yard cuts in coordinating prints (I used Cottage Garden by The Quilted Fish, plus some blenders)
1/2 yd for binding
1 1/2 yds for backing
You will also need your trusty seam ripper :)
1. Cut strips to 4.5" by WOF. (You can technically make two of these quilts out of 1/4 yd cuts, if your cuts are very careful and straight.) You should have 12 strips, one of each print. (These cut strips are folded into quarters.)
2. Arrange the the strips however you'd like. You can blend the colors to achieve an ombre look, or go for high contrast with distinct stripes. The stripes you see here will be the same as the diagonal stripes in the end. Also, keep in mind that the top and bottom rows will touch eventually, so make sure you like the way they look together.
You can see here I arranged the colors with two different results in mind- one with blended colors and one with contrasting.
3. Sew strips together. Use a 1/4" seam. You know the drill.
You'll have what could be a simple striped quilt top. Don't trim it yet! The fabric widths vary depending on manufacturer, and that's alright.
4. Press seams, alternating the direction on every row. This will ensure that your seams nest in the end, making it much easier to match up corners.
5. Fold in half, right sides together, and sew the top and bottom strip together. You will create a tube of strips. You can see I don't fuss about threads until the end.
6. Lay the "tube" flat, and cut perpendicularly into 4.5" strips. I fold it in half again for easier cutting, just make sure it's lined up! You should have 9 tube strips.
7. Take a tube strip and unpick one of the seams. Keep in mind that wherever you start unpicking will determine which print will start the pattern in the upper left corner. Lay that strip flat.
8. Determine which seam needs to be unpicked in the second row by looking at the first two prints of your first flat strip. Unpick the seam between those two first prints. When you lay this one next to the first you will see that the prints have all shifted over one spot. Continue to do this, laying them out with the first color from the last row in the last spot on the next, and you will see the diagonal stripes emerge. Remember, these are the vertical columns of the quilt. (You can see I have highly qualified help!)
EDIT: For my newest rainbow version, I wanted the diagonal lines to go up instead of down, so I unpicked the first seam on the other end first.
*Note: You can't rotate the layout (like in the original Scrappy Trip block) unless you reduce the pattern to a 9 by 9 grid. It will only work with a square layout. I highly recommend trying that too, it's super fun!
9. Sew your strips together, "nesting" the seams as you go. As you put your strips right sides together to join them, you'll see that the seams you ironed will alternate, making them easy to tuck into each other as you go. This eliminates the need to pin, and you can feel that the seams are lined up perfectly, making perfect corner points. Press your rows all one direction and trim any threads.
Voila! You have a lovely 36" by 48" quilt top ready to go- the perfect baby size. Layer, baste, and bind with your favorite method. There are lots of wonderful tutorials out there for these steps if you are still learning.
Great tutorial!! Love how this works.
ReplyDeleteI'll have to try this!!
ReplyDeleteI love your quilts. Virtually every quilt tutorial becomes a favorite. Thank you for your willingness to share your talents.
ReplyDeleteThank you Stephanie, that is so kind. It is my pleasure!
DeleteNot including choosing and precutting iron - took me 1.5 hrs for flimsy with 8 fabrics. I always think everything looks better with a border so then I put 1 - so...yeah. Easy. I'm going to try again with some other scraps - my charity of choice is Project Linus and they can always use.
ReplyDeleteI've made this over and over for the new babies in my workplace (there must be something in the water!) It's such fun and not difficult at all.
ReplyDeleteIt became very interesting for me which site in the United kingdom has the best gaming conditions for playing slot machines online. And I came across this site - Star Cаsino Gold Coast . On this site, as it turned out, the best gaming conditions for playing slot machines online in the united kingdom and this site has become like home to me!
ReplyDelete